INSTABOND SYSTEM CYANOACRYLATE INSTANT ADHESIVE REPAIR SYSTEM Crest Industries, Inc., Trenton, MI 48183 Phone 800-822-4100 Fax 734-479-4040 NAME
STOCK No. VISCOSITY COLOR DESCRIPTION USES BONDING TIME (SECONDS) WITH ACCELERATOR (SECONDS) INSTABOND No. BCIB20
20gm. BOTTLE No. BCIB5
5gm. BOTTLE FLUID
LIQUID CLEAR USED TO BOND MATERIALS WHERE CONTACT AREAS TOLERANCES
ARE VERY TIGHT. EXCELLENT FOR REPAIRS ON CLEAR OR COLORED MATERIALS. CAN BE USED TO RESURFACE AN AREA BY COATING AND THEN
APPLYING INSTABOND ACCELERATOR. CAN BE COMBINED WITH FIBERGLASS TAPE OR RE-BOND STRIPS
TO REINFORCE REPAIRS.
BONDS:PLASTIC, RUBBER, GLASS, CERAMICS, METAL, AND FABRICS.
CAN BE SANDED AND PAINTED. 5 1 INSTABOND
INSTAGEL No. TCIBG
20gm. TUBE NON-SAG
GEL CLEAR USED TO BOND MATERIALS WHERE CONTACT AREAS CONTAIN
VOIDS OR GAPS. CAN ALSO BE USED TO BOND VERTICAL SURFACES WHERE A FLUID
BONDING MATERIAL WILL RUN OFF. CAN BE BUILT UP TO FILL OR BRIDGE VOIDS AND GAPS BY
REAPPLYING MULTIPLE APPLICATIONS WHILE USING INSTABOND
ACCELERATOR TO ACTIVATE AND CURE.
BONDS: PLASTIC, RUBBER, GLASS, CERAMICS, METAL, FABRICS, AND
WOOD. CAN BE SANDED AND PAINTED. 30 5 INSTABLACK No. BCIBB
20gm. BOTTLE HI-SOLID
THICK
LIQUID BLACK DESIGNED FOR USE ON FLEXIBLE MATERIALS. (BLACK PLASTICS,
RUBBER WEATHERSTRIP, AND TRIM). USED TO BOND MATERIALS WHERE CONTACT AREAS ARE TIGHTLY
FITTED BUT MAY CONTAIN SOME VOIDS OR GAPS. CAN ALSO BE USED TO BOND VERTICAL SURFACES WHERE CLEAR
INSTABOND WOULD RUN OFF. CAN BE BUILT UP BY REAPPLICATION TO FILL OR BRIDGE VOIDS AND
GAPS USING INSTABOND ACCELERATOR TO ACTIVATE AND CURE.
BONDS: PLASTIC, RUBBER, GLASS, CERAMICS, METAL, FABRICS, AND
WOOD.CAN BE SANDED AND PAINTED. 30 10 INSTA-FILL
ACCELERATOR No. BIA
30gm. BOTTLE FINE
POWDER WHITE ACCELERATES THE CURE OF INSTABOND AND INSTABLACK ADHESIVES
APPROXIMATELY 500% (5X) APPLY INSTA-FILL BEFORE OR AFTER APPLING THE GLUE DEPEND-
ING ON APPLICATION. CAN BE USED TO FILL GAPS OR HOLES. APPLY AS MANY APPLICA-
TIONS AS NECESSARY TO ACHIEVE DESIRED DEPTH. CAN BE SANDED AND PAINTED INSTASET
ACCELERATOR No. BIS 2oz.
PUMP BOTTLE THIN FLUID
LIQUID CLEAR ACCELERATES THE CURE OF INSTABOND AND INSTABLACK ADHESIVES APPROXIMATELY 500% (5X) APPLY INSTABOND TO ONE SURFACE THEN SPRAY ACCELERATOR
TO OPPOSITE SURFACE AND ASSEMBLE PARTS. ASSEMBLE PARTS WITH INSTABOND ADHESIVE THEN SPRAY
ACCELERATOR DIRECTLY ON INSTABOND TO CURE. WHERE THICK APPLICATION OF INSTABOND IS NECESSARY, APPLY
ACCELERATOR TO BONDING AREA AND ALLOW TO DRY PRIOR TO
APPLICATION OF INSTABOND . THEN REAPPLY AFTER INSTABOND
APPLICATION TO CURE TOP SURFACE. INSTDSOLV
SOLVENT &
REMOVER No. BID 2oz. BOTTLE THIN FLUID
LIQUID CLEAR ¡ DISSOLVES AND REMOVES ALL CYANOACRYLATE ADHESIVES. ¡ REMOVES INK AND URETHANE FROM FABRIC AND PLASTICS. TEST BEFORE USING!!!! ¡ APPLICATION OF INSTDSOLV OVER A BONDED AREA CAN SMOOTH
AND RESURFACE THE AREA BY APPLYING INSTDSOLV TO RAG OR
SCUFFPAD AND RUBBING DESIRED AREA. ¡ WORKS GREAT FOR CLEANING THE NOZZLES OF THE ADHESIVES
OR REMOVING THE ADHESIVE FROM SKIN. ¡ CLEAN UP ACCIDENTAL SPILLS.
